Monday, May 4, 2020

2010 Acura Truck MDX V6-3.7L Page 136


YES -



Go to step 6.



NO -



Intermittent failure, the system is OK at this time. Check for poor or loose connections between the VSA modulator-control unit and the active



damper control unit.?



6. Check for VSA system DTCs with the DTS See: Brakes and Traction Control/Antilock Brakes / Traction Control Systems/Testing and



Inspection/Reading and Clearing Diagnostic Trouble Codes.



Is any DTC indicated?



YES -



Go to the indicated VSA system DTC's troubleshooting.?



NO -



Go to step 7.



7. Turn the ignition switch to LOCK (0).



8. Substitute a known-good active damper control unit See: Relays and Modules/Relays and Modules - Steering and Suspension/Relays and



Modules - Suspension/Suspension Control Module/Service and Repair.



9. Turn the ignition switch to ON (II).



10. Clear the DTC with the HDS.



11. Turn the ignition switch to LOCK (0).



12. Test-drive the vehicle around corners at 10 mph (15 km/h) or more.



13. Check for DTCs with the HDS.



Is DTC 3-4 indicated?



YES -



Update the VSA modulator-control unit if it does not have the latest software See: Brakes and Traction Control/Antilock Brakes / Traction Control



Systems/Traction Control Module/Testing and Inspection, or substitute a known-good VSA modulator-control unit See: Brakes and Traction



Control/Antilock Brakes / Traction Control Systems/Traction Control Module/Service and Repair, then go to step 1 and recheck. If the VSA



modulator-control unit was updated and DTCs are not indicated, troubleshooting is complete. If the VSA modulator-control unit was substituted



and DTCs are not indicated, replace the original VSA modulator-control unit See: Brakes and Traction Control/Antilock Brakes / Traction Control



Systems/Traction Control Module/Service and Repair.?



NO -



Replace the original active damper control unit See: Relays and Modules/Relays and Modules - Steering and Suspension/Relays and Modules -



Suspension/Suspension Control Module/Service and Repair.?



3-6



Active Damper System DTC Troubleshooting: 3-1, 3-3, 3-6, 3-7, 3-9, 3-A



DTC 3-1:



Yaw Rate-Lateral/Longitudinal Acceleration Sensor Range/Performance Problem (Yaw Rate Signal-Lateral Acceleration Signal Incorrect



Correlation)



DTC 3-3:



Yaw Rate-Lateral/Longitudinal Acceleration Sensor Malfunction (Lateral Acceleration Sensor)



DTC 3-6:



Yaw Rate-Lateral/Longitudinal Acceleration Sensor Malfunction (Yaw Rate Sensor)