16. Measure the resistance between SRS unit connector A (39P) terminals No. 36 and No. 37. There should be less than 1.0 Ohms.
Is the resistance as specified?
YES -
Faulty left front impact sensor or SRS unit; replace the left front impact sensor See: Restraints and Safety Systems/Air Bag Systems/Impact
Sensor/Service and Repair/Front Impact Sensor Replacement, then clear the DTC. If the problem is still present, replace the SRS unit See: Relays
and Modules/Relays and Modules - Restraints and Safety Systems/Air Bag Control Module/Service and Repair/SRS Unit Replacement.?
NO -
Open in the left engine compartment wire harness or the dashboard wire harness; replace the faulty harness, then clear the DTC.?
41-2
SH AWD DTC Troubleshooting: 41-2
DTC 41-2:
F-CAN Malfunction (Lost Communication with VSA)
NOTE: Before you troubleshoot, review the general troubleshooting information See: Transmission and Drivetrain/Differential Assembly/Testing
and Inspection/Initial Inspection and Diagnostic Overview.
1. Turn the ignition switch to ON (II).
2. Check for DTCs in the PGM-FI system with the HDS.
Are there any PGM-FI system DTCs indicated?
YES -
Go to the indicated DTC's troubleshooting.?
NO -
Go to step 3.
3. Clear the DTC with the HDS.