Is the resistance between 0.6-2.0 Ohms?
YES -
Check for poor or loose connections in the active damper control unit, clean body ground terminals G302 and G401. If the connections and the
terminal are OK, replace the active damper control unit See: Relays and Modules/Relays and Modules - Steering and Suspension/Relays and
Modules - Suspension/Suspension Control Module/Service and Repair, then go to step 11.
NO -
Repair an open in the wires between the damper coil and active damper control unit, then go to step 11.
11. Reconnect all connectors.
12. Turn the ignition switch to ON (II).
13. Clear the DTC with the HDS.
14. Turn the ignition switch to LOCK (0).
15. Start the engine.
16. Do the DAMPER FORCE OPERATION TEST in the FUNCTIONAL TESTS MENU with the HDS.
17. Check for DTC's with the HDS.
Is any DTC indicated?
YES -
Go to the indicated DTC's troubleshooting.
NO -
Troubleshooting is complete.?
7-9
Active Damper System DTC Troubleshooting: 7-9
DTC 7-9:
Active Damper Control Unit Internal Circuit Malfunction
NOTE: If DTC 5-5, DTC 5-6, DTC 5-7, or DTC 5-8 stored at the same time as DTC 7-9, troubleshoot DTC 5-5, DTC 5-6, DTC 5-7, or DTC 5-8
first, then recheck for DTC 7-9.
1. Turn the ignition switch to ON (II).
2. Clear the DTC with the HDS.
