13. Turn the ignition switch to LOCK (0).
14. Check for continuity between body ground and the appropriate wheel speed sensor +B and GND terminals of the VSA modulator-control
unit 46P connector individually (see table).
Is there continuity?
YES -
Go to step 15.
NO -
Go to step 17.
15. Disconnect the appropriate wheel speed sensor 2P connector See: Brakes and Traction Control/Antilock Brakes / Traction Control
Systems/Wheel Speed Sensor/Service and Repair.
16. Check for continuity between body ground and the appropriate wheel speed sensor +B and GND terminals of the VSA modulator-control
unit 46P connector individually (see table).
