12. Measure the resistance between body ground and driver's seat wire harness 3P connector terminal No. 2. There should be an open circuit or
at least 1 MOhms.
Is the resistance as specified?
YES -
Faulty SRS unit; replace the SRS unit See: Relays and Modules/Relays and Modules - Restraints and Safety Systems/Air Bag Control
Module/Service and Repair/SRS Unit Replacement.?
NO -
Short to ground in the driver's seat wire harness or the floor wire harness; replace the faulty harness, then clear the DTC.?
Adaptive Cruise Control
Adaptive Cruise Control (ACC) DTC Troubleshooting: 62
DTC 62:
Millimeter Wave Radar Sensor Error
1. Clear the DTCs with the HDS.
2. Turn the ignition switch to ON (II), then wait for 10 seconds, and press the MAIN switch ON.
3. Watch the ACC indicator and the CMBS indicators.
Do both indicators come on?
YES -
Go to step 4.
NO -
Intermittent failure, the system is OK at this time.?
4. Check for DTCs with the HDS.
Is DTC 62 indicated?
YES -
Check for loose or poor connections. If OK, replace the millimeter wave radar See: Accessories and Optional Equipment/Collision Avoidance and
Parking Assist Systems/Distance Sensor/Service and Repair. After replacement, aim the millimeter wave radar See: Accessories and Optional
Equipment/Collision Avoidance and Parking Assist Systems/Distance Sensor/Adjustments.?
NO -
Intermittent failure, the system is OK at this time.?
VSA System
VSA DTC Troubleshooting: 62
