Monday, March 16, 2020

2010 Acura Truck MDX V6-3.7L Page 388


Is DTC 60, 110, or 111 indicated?



YES -



Troubleshoot the indicated DTC(s).?



NO -



Troubleshoot the brake pedal position switch signal circuit See: Powertrain Management/Computers and Control Systems/Testing and



Inspection/Component Tests and General Diagnostics/Brake Pedal Position Switch Signal Circuit Troubleshooting.?



TPMS System



TPMS DTC Troubleshooting: 32, 34, 36, 38



DTC 32, 34, 36, 38:



Tire Pressure Sensor Signal Failure



NOTE:



- Inspect for an aftermarket electrical device(s) (such as an inverter, battery charger, CB radio, etc) interfering with the RF signal from the



sensors when turning the ignition switch is ON (II).



- Vehicle must be driven for 3 minutes at 15 mph (24 km/h) or more for DTC 32, 34, 36, or 38 to set.



1. Turn the ignition switch to ON (II).



2. Check the DTC indicated to the tire location to make sure the wheel is a TPMS type with the tire pressure sensor.



Is a TPMS type wheel with a tire pressure sensor mounted on the vehicle?



YES -



Go to step 3.



NO -



Install a TPMS type wheel, and memorize the sensor ID. Drive the vehicle above 15 mph (24 km/h) for 40 continuous seconds, or memorize the



ID with the HDS See: Instrument Panel, Gauges and Warning Indicators/Tire Monitoring System/Tire Pressure Sensor/Testing and Inspection.?



3. Test-drive the vehicle.



4. Check the VEHICLE SPEED in the TPMS DATA LIST with the HDS.



Is the vehicle speed indicated?



YES -



Go to step 8.



NO -



Go to step 5.



5. Turn the ignition switch to LOCK (0).



6. Turn the ignition switch to ON (II).



7. Check for DTCs with the HDS.