17. Disconnect SRS unit connect B (39P) from the SRS unit.
18. Disconnect the ODS unit harness 18P connector (A) from the ODS unit (B).
19. Measure the resistance between body ground and SRS unit connector B (39P) terminal No. 1. There should be an open circuit or at least 1M
Ohms.
Is the resistance as specified?
YES -
Go to step 20.
NO -
Short to ground between SRS unit connector B (39P) terminal No. 1 and E-pretensioner unit connector B (14P) terminal No. 6.?
20. Measure the resistance between SRS unit connector B (39P) terminal No. 1 and E-pretensioner unit connector B (14P) terminal No. 6. There
should be less than 1.0 Ohms.
Is the resistance as specified?
YES -
Faulty E-pretensioner unit; replace the E-pretensioner unit See: Restraints and Safety Systems/Seat Belt Systems/Seat Belt Tensioner/Service and
Repair/Removal and Replacement.?
