Is the resistance between 0.6-2.0 Ohms?
YES -
Replace the active damper control unit See: Relays and Modules/Relays and Modules - Steering and Suspension/Relays and Modules -
Suspension/Suspension Control Module/Service and Repair, then go to step 16.
NO -
Go to step 12.
12. Disconnect the appropriate damper coil 2P connector.
13. Check for continuity between body ground and appropriate damper coil 2P connector terminals No. 1 and No. 2 individually (see table).
Is there continuity?
YES -
Repair a short to body ground in the wire between the appropriate damper coil and active damper control unit, then go to step 16.
NO -
Go to step 14.
14. Check for continuity between the appropriate active damper control unit connector A (20P) terminal and appropriate damper coil 2P
connector terminal No. 1 (see table).
