11. Start the engine.
12. Measure the voltage between body ground and the appropriate wheel speed sensor +B and GND terminals of the VSA modulator-control unit
46P connector individually (see table).
Is there 0.1 V or more?
YES -
Repair a short to power in the wire between the VSA modulator-control unit and the appropriate wheel speed sensor.?
NO -
Go to step 13.
13. Turn the ignition switch to LOCK (0).
14. Check for continuity between body ground and the appropriate wheel speed sensor +B and GND terminals of the VSA modulator-control
unit 46P connector individually (see table).
