3. Check for DTCs with the HDS.
Is DTC 45-1x (except 45-11) indicated?
YES -
Faulty left side impact sensor (second); replace the left side impact sensor (second) See: Restraints and Safety Systems/Air Bag Systems/Impact
Sensor/Service and Repair/Side Impact Sensor (Second) Replacement, then clear the DTC.?
NO -
Go to step 4.
4. Clear the DTCs with the HDS.
5. Turn the ignition switch to ON (II), then wait for 10 seconds.
6. Check for DTCs with the HDS.
Is DTC 43-1x (except 43-11) indicated?
YES -
Faulty left side impact sensor (first); replace the left side impact sensor (first), then clear the DTC.?
NO -
Go to step 7.
7. Clear the DTCs with the HDS.
8. Turn the ignition switch to ON (II), then wait for 10 seconds.
9. Check for DTCs with the HDS.
Is DTC 45-11 indicated?
YES -
Go to step 13.
NO -
Go to step 10.
10. Clear the DTCs with the HDS.
11. Turn the ignition switch to ON (II), then wait for 10 seconds.
12. Check for DTCs with the HDS.
Is DTC 43-11 indicated?
YES -
Go to step 42.
NO -
Intermittent failure, the system is OK at this time. Go to Troubleshooting Intermittent Failures. If another DTC is indicated, troubleshoot the DTC.?
13. Turn the ignition switch to LOCK (0).
14. Check the connections between SRS unit connector B (39P) and the SRS unit, and between the floor wire harness 4P connector and the left
side impact sensor (first) See: Restraints and Safety Systems/Air Bag Systems/Impact Sensor/Service and Repair/Side Impact Sensor (First)
Replacement and between the floor wire 2P connector and left side impact sensor (second) See: Restraints and Safety Systems/Air Bag
Systems/Impact Sensor/Service and Repair/Side Impact Sensor (Second) Replacement.
Are the connections OK?
