Sensor/Service and Repair/Side Impact Sensor (First) Replacement, then clear the DTC.?
30. Turn the ignition switch to LOCK (0).
31. Disconnect the negative cable from the battery, then wait at least 3 minutes.
32. Disconnect SRS unit connector B (39P) from the SRS unit.
33. Disconnect the floor wire harness 4P connector from the right side impact sensor (first) See: Restraints and Safety Systems/Air Bag
Systems/Impact Sensor/Service and Repair/Side Impact Sensor (First) Replacement.
34. Disconnect the floor wire harness 2P connector from the right side impact sensor (second) See: Restraints and Safety Systems/Air Bag
Systems/Impact Sensor/Service and Repair/Side Impact Sensor (Second) Replacement.
35. Measure the resistance between floor wire harness 2P connector (right side impact sensor (second)) terminals No. 1 and No. 2. There should
be an open circuit or at least 1 MOhms.
Is the resistance as specified?
YES -
Go to step 36.
NO -
Short to another wire in the floor wire harness between the right side impact sensor (first) and the right side impact sensor (second); replace the
floor wire harness, then clear the DTC.?
36. Measure the resistance between body ground and floor wire harness 2P connector (right side impact sensor (second)) terminals No. 1 and No.
2 individually. There should be an open circuit or at least 1 MOhms.
Is the resistance as specified?
YES -
Go to step 37.
NO -
Short to ground in the floor wire harness between the right side impact sensor (first) and the right side impact sensor (second); replace the floor
wire harness, then clear the DTC.?
37. Reconnect the negative cable to the battery.
38. Turn the ignition switch to ON (II).
