Open between the No. 10 terminal of E-pretensioner unit connector B (14P) and body ground, or between the No. 11 terminal of E-pretensioner
unit connector B (14P) and body ground or poor connection at G605.?
15. Measure the resistance between body ground and E-pretensioner unit connector A (5P) terminal No. 5. There should be less than 1.0 Ohms.
Is the resistance as specified?
YES -
Go to step 16.
NO -
Open between the No. 5 terminal of E-pretensioner unit connector A (5P) and body ground or poor connection G605.?
16. Disconnect the negative cable from the battery, then wait at least 3 minutes.
17. Disconnect SRS unit connect B (39P) from the SRS unit.
18. Disconnect the ODS unit harness 18P connector (A) from the ODS unit (B).
19. Measure the resistance between body ground and SRS unit connector B (39P) terminal No. 1. There should be an open circuit or at least 1M
Ohms.
Is the resistance as specified?
