Is there battery voltage?
YES -
Go to step 7.
NO -
Repair an open in the wire between the No. 11 (15 A) fuse in the main under-hood fuse box and the brake pedal position switch.?
7. Short the SCS line with the HDS.
8. Disconnect the PCM connector A (49P).
9. Check for continuity between brake pedal position switch 4P connector terminal No. 2 and PCM connector A (49P) terminal No. 8.
Is there continuity?
YES -
Go to step 10.
NO -
Repair an open in the wire between the PCM and the brake pedal position switch.?
10. Reconnect all connectors.
11. Do the brake pedal position switch test See: Brakes and Traction Control/Antilock Brakes / Traction Control Systems/Braking
Sensor/Switch/Testing and Inspection.
Is the switch OK?
YES -
Go to step 12.
NO -
Replace the brake pedal position switch See: Brakes and Traction Control/Brake Pedal Assy/Adjustments.?
