Accessories and Optional Equipment/Radio, Stereo, and Compact Disc/Service and Repair/Audio-Navigation Unit Removal/Installation.?
1305
Navigation System DTC Troubleshooting: 1305
DTC 1305:
Gyro Error 2
NOTE:
- Check the vehicle battery condition first See: Starting and Charging/Battery/Testing and Inspection/Component Tests and General
Diagnostics/Battery Test.
- This navigation DTC sets when there is a problem with the internal YAW rate sensor.
- Check any official Honda service website for more service information about the navigation system.
- Before you troubleshoot, make sure to follow the general troubleshooting information See: Accessories and Optional Equipment/Navigation
System/Testing and Inspection/Initial Inspection and Diagnostic Overview/How to Troubleshoot the Navigation System.
- Make sure the vehicle is parked outside, away from buildings.
- Aftermarket electronic devices located near the audio-navigation unit or GPS antenna can potentially interfere with the operation of the
navigation system.
- Do this test only when the vehicle cabin temperature is between -4 掳F (-20 掳C) and 158 掳F (70 掳C).
1. Clear the hard error code.
2. Turn the ignition switch to LOCK (0), and then back to ON (II).
3. Go into the Diagnostic Menu, and select the Self-Diagnosis Mode in the Select Diagnosis Items menu See: Accessories and Optional
Equipment/Navigation System/Testing and Inspection/Initial Inspection and Diagnostic Overview/Navigation System Diagnostic Mode.
4. Check the System Links.
Is the Yaw Sensor icon red?
YES -
Replace the audio-navigation unit See: Accessories and Optional Equipment/Radio, Stereo, and Compact Disc/Service and
Repair/Audio-Navigation Unit Removal/Installation.?
NO -
Intermittent failure, the system is OK at this time. If the vehicle repeatedly comes back with the DTC, replace the audio-navigation unit See:
Accessories and Optional Equipment/Radio, Stereo, and Compact Disc/Service and Repair/Audio-Navigation Unit Removal/Installation.?
1306
Navigation System DTC Troubleshooting: 1306
DTC 1306:
Vehicle Speed Pulse
NOTE:
- Check the vehicle battery condition first See: Starting and Charging/Battery/Testing and Inspection/Component Tests and General
Diagnostics/Battery Test.
- This navigation DTC sets when there is a problem with the VSP circuit.
- Check any official Honda service website for more service information about the navigation system.
- Before you troubleshoot, make sure to follow the general troubleshooting information See: Accessories and Optional Equipment/Navigation
System/Testing and Inspection/Initial Inspection and Diagnostic Overview/How to Troubleshoot the Navigation System.
- This DTCs may be caused by electrical interference. Check for aftermarket devices installed in the vehicle.
1. Check the MIL on the gauge See: Powertrain Management/Computers and Control Systems/Testing and Inspection/Initial Inspection and
Diagnostic Overview.
Is the MIL on?
YES -
Go to the PGM-FI system's general troubleshooting information See: Powertrain Management/Computers and Control Systems/Testing and
