Tuesday, April 7, 2020

2010 Acura Truck MDX V6-3.7L Page 778


Is there continuity?



YES -



Replace the XM receiver See: Accessories and Optional Equipment/Radio, Stereo, and Compact Disc/Service and Repair/XM Receiver



Removal/Installation.?



NO -



There is an open in the wire(s) between the XM receiver and the audio-navigation unit. Replace the affected shielded harness.?



2608



Navigation System DTC Troubleshooting: 1701, 2608



DTC 1701:



Rear Camera Error



DTC 2608:



Rear Camera Diag



NOTE:



- Check the vehicle battery condition first See: Starting and Charging/Battery/Testing and Inspection/Component Tests and General



Diagnostics/Battery Test.



- These navigation DTCs set when a communication error between the rearview camera and the navigation display (open or short) is detected.



- Check any official Honda service website for more service information about the navigation system.



- Before you troubleshoot, make sure to follow the general troubleshooting information See: Accessories and Optional Equipment/Navigation



System/Testing and Inspection/Initial Inspection and Diagnostic Overview/How to Troubleshoot the Navigation System.



1. Clear the hard error code.



2. Turn the ignition switch to LOCK (0), and then back to ON (II).



3. Go into the Diagnostic Menu, and select the Self-Diagnosis Mode in the Select Diagnosis Items menu.



4. Check the System Links.



Is the Rear camera icon red?



YES -



Go to step 5.



NO -



Intermittent failure, the system is OK at this time.?



5. Turn the ignition switch to LOCK (0).



6. Check for poor connections or loose terminals at rearview camera 6P connector.



Are there connections OK?