connector and the right front impact sensor See: Restraints and Safety Systems/Air Bag Systems/Impact Sensor/Service and Repair/Front
Impact Sensor Replacement.
Are the connections OK?
YES -
Go to step 7.
NO -
Repair the poor connections, then clear the DTC, and retest.?
7. Disconnect SRS unit connector A (39P) from the SRS unit.
8. Disconnect the right engine compartment wire harness 2P connector from the right front impact sensor.
9. Measure the resistance between SRS unit connector A (39P) terminals No. 38 and No. 39. There should be an open circuit or at least 1
MOhms.
Is the resistance as specified?
YES -
Go to step 10.
NO -
Short to another wire in the right engine compartment wire harness or the dashboard wire harness; replace the faulty harness, then clear the DTC.?
10. Measure the resistance between body ground and SRS unit connector A (39P) terminals No. 38 and No. 39 individually. There should be an
open circuit or at least 1 MOhms.
Is the resistance as specified?
YES -
Go to step 11.
NO -
Short to ground in the dashboard wire harness or the right engine compartment wire harness; replace the faulty harness, then clear the DTC.?
11. Reconnect the negative cable to the battery.
