Is DTC 76-4x, 76-5x, or 76-63 indicated?
YES -
Replace the E-pretensioner unit See: Restraints and Safety Systems/Seat Belt Systems/Seat Belt Tensioner/Service and Repair/Removal and
Replacement, then clear the DTC.?
NO -
Intermittent failure, the system is OK at this time. Go to Troubleshooting Intermittent Failures. If another DTC is indicated, troubleshoot the DTC.?
76-5x
SRS DTC Troubleshooting: 76-4x, 76-5x, 76-63
DTC 76-4x, 76-5x, 76-63 ("x" can be 0 thru 9 or A thru F):
Internal Failure of the E-Pretensioner Unit
NOTE: Before doing this troubleshooting procedure, review SRS Precautions and Procedures See: Body and Frame/Air Bag(s) Arming and
Disarming/Service and Repair and General Troubleshooting Information See: Restraints and Safety Systems/Air Bag Systems/Testing and
Inspection/Reading and Clearing Diagnostic Trouble Codes
1. Clear the DTCs with the HDS.
2. Turn the ignition switch to ON (II), then wait for 10 seconds.
3. Check for DTCs with the HDS.
Is DTC 76-4x, 76-5x, or 76-63 indicated?
YES -
Replace the E-pretensioner unit See: Restraints and Safety Systems/Seat Belt Systems/Seat Belt Tensioner/Service and Repair/Removal and
Replacement, then clear the DTC.?
NO -
Intermittent failure, the system is OK at this time. Go to Troubleshooting Intermittent Failures. If another DTC is indicated, troubleshoot the DTC.?
76-31
SRS DTC Troubleshooting: 76-31
DTC 76-31:
Faulty F-CAN Communication or Internal Failure of the E-Pretensioner Unit (ACC System)
NOTE: Before doing this troubleshooting procedure, review SRS Precautions and Procedures See: Body and Frame/Air Bag(s) Arming and
Disarming/Service and Repair and General Troubleshooting Information See: Restraints and Safety Systems/Air Bag Systems/Testing and
Inspection/Reading and Clearing Diagnostic Trouble Codes.
1. Clear the DTCs with the HDS.
2. Turn the ignition switch to ON (II), then wait for 10 seconds.
3. Check for DTCs with the HDS.
Is DTC 76-31 indicated?
YES -
Go to step 4.
NO -
Intermittent failure, the system is OK at this time. Go to Troubleshooting Intermittent Failures. If another DTC is indicated, troubleshoot the DTC.?
4. Turn the ignition switch to LOCK (0).
5. Turn the ignition switch to ON (II), then wait for 10 seconds.
