5. Check for DTCs with the HDS.
Is DTC B1000 also indicated?
YES -
Troubleshoot DTC B1000.?
NO -
Intermittent failure, the system is OK at this time. Check for loose or poor connections at the MICU and B-CAN connected units in the table.?
B1352
DTC Troubleshooting: B1352
DTC B1352:
Power Tailgate Control Unit Internal Error (EEPROM error)
NOTE: If you are troubleshooting multiple DTCs, be sure to follow the instructions in B-CAN System Diagnosis Test Mode A See: Powertrain
Management/Computers and Control Systems/Information Bus/Testing and Inspection/Component Tests and General Diagnostics/Troubleshooting
- B-CAN System Diagnosis Test Mode A.
1. Turn the ignition switch to LOCK (0).
2. Connect the HDS to the data link connector.
3. Remove the No. 7 (10 A) fuse from the under-dash fuse/relay box.
4. Wait for at least 1 minute, then reinstall the No. 7 (10 A) fuse to the under-dash fuse/relay box.
5. Close the tailgate manually (not with the power tailgate switch).
6. Turn the ignition switch to ON (II).
7. Check for DTCs with the HDS.
Is DTC B1352 indicated?
YES -
Replace the power tailgate control unit.?
NO -
Intermittent failure, the power tailgate control unit is OK at this time. Check for loose or poor connections between the power tailgate control unit
