Is there continuity?
YES -
Go to step 10.
NO -
Repair an open in the wire between the gauge control module and the fuel tank unit.?
10. Do the fuel gauge sending unit test See: Instrument Panel, Gauges and Warning Indicators/Fuel Gauge Sender/Testing and Inspection.
Is the fuel tank unit OK?
YES -
Replace the gauge control module.?
NO -
Replace the fuel gauge sending unit.?
B1176
DTC Troubleshooting: B1176
DTC B1176:
Fuel Level Sensor (Fuel Gauge Sending Unit) Circuit Short
NOTE: If you are troubleshooting multiple DTCs, be sure to follow the instructions in B-CAN System Diagnosis Test Mode A See: Powertrain
Management/Computers and Control Systems/Information Bus/Testing and Inspection/Component Tests and General Diagnostics/Troubleshooting
- B-CAN System Diagnosis Test Mode A.
1. Clear the DTCs with the HDS.
2. Turn the ignition switch to LOCK (0), and then back to ON (II).
3. Wait for at least 30 seconds.
4. Check for DTCs with the HDS.
Is DTCs B1176 indicated?