Is there battery voltage?
YES -
Go to step 13.
NO -
Open between No. 5 (30 A) fuse in the main under-hood fuse box and E-pretensioner unit connector A (5P) terminal No. 2.?
13. Turn the ignition switch to LOCK (0).
14. Measure the resistance between body ground and E-pretensioner unit connector B (14P) terminals No. 10 and No. 11 individually. There
should be less than 1.0 Ohms.
Are the resistances as specified?
YES -
Go to step 15.
NO -
Open between the No. 10 terminal of E-pretensioner unit connector B (14P) and body ground, or between the No. 11 terminal of E-pretensioner
unit connector B (14P) and body ground or poor connection at G605.?
15. Measure the resistance between body ground and E-pretensioner unit connector A (5P) terminal No. 5. There should be less than 1.0 Ohms.
Is the resistance as specified?
YES -
Go to step 16.
NO -
Open between the No. 5 terminal of E-pretensioner unit connector A (5P) and body ground or poor connection G605.?
16. Disconnect the negative cable from the battery, then wait at least 3 minutes.
