Is there continuity?
YES -
Go to step 12.
NO -
Repair an open in the wire between the yaw rate-lateral/longitudinal acceleration sensor and the active damper control unit.?
12. Substitute a known-good active damper control unit See: Relays and Modules/Relays and Modules - Steering and Suspension/Relays and
Modules - Suspension/Suspension Control Module/Service and Repair.
13. Reconnect all connectors.
14. Turn the ignition switch to ON (II).
15. Clear the DTC with the HDS.
16. Turn the ignition switch to LOCK (0).
17. Start the engine, and wait 5 seconds.
18. Check for DTCs with the HDS.
Is DTC 8-5 indicated?
YES -
Replace the yaw rate-lateral/longitudinal acceleration sensor See: Brakes and Traction Control/Antilock Brakes / Traction Control Systems/Yaw
Rate Sensor/Service and Repair.?
NO -
Replace the original active damper control unit See: Relays and Modules/Relays and Modules - Steering and Suspension/Relays and Modules -
Suspension/Suspension Control Module/Service and Repair.?
8-6
Active Damper System DTC Troubleshooting: 8-6
DTC 8-6:
F-CAN Malfunction (Active Damper Control Unit Lost Communication With VSA Modulator-control Unit)
