resistance between the same terminals after reversing the positive and negative tester probes.
Is the resistance infinity (ohmmeter may read OL) in both directions?
YES -
Replace the appropriate wheel speed sensor See: Brakes and Traction Control/Antilock Brakes / Traction Control Systems/Wheel Speed
Sensor/Service and Repair.?
NO -
Repair an open in the wire between the appropriate wheel speed sensor and the VSA modulator-control unit.?
20. Check for continuity between the appropriate VSA modulator-control unit 46P connector wheel speed sensor +B and GND terminals (see
table), then check for continuity between the same terminals after reversing the positive and negative tester probes.
Is there continuity in both directions?
YES -
Go to step 21.
NO -
Go to step 29.
21. Disconnect the appropriate wheel speed sensor 2P connector See: Brakes and Traction Control/Antilock Brakes / Traction Control
Systems/Wheel Speed Sensor/Service and Repair.
22. Check for continuity between the appropriate VSA modulator-control unit 46P connector wheel speed sensor +B and GND terminals (see
table), then check for continuity between the same terminals after reversing the positive and negative tester probes.
