NO -
Intermittent failure, the system is OK at this time. Go to Troubleshooting Intermittent Failures. If another DTC is indicated, troubleshoot the DTC.?
TPMS System
TPMS DTC Troubleshooting: 83
DTC 83:
No VSP Signal
NOTE: Check the fuel and emission systems DTCs with the HDS, and troubleshoot the PCM and F-CAN communication errors first See:
Powertrain Management/Computers and Control Systems/Testing and Inspection/Initial Inspection and Diagnostic Overview.
1. Turn the ignition switch to ON (II).
2. Clear the DTC with the HDS.
3. Test-drive the vehicle.
4. Check for DTCs with the HDS.
Is DTC 83 indicated?
YES -
Go to step 5.
NO -
The system is OK at this time.?
5. Check for DTCs with the HDS.
Is DTC 85 indicated?
YES -
Go to DTC 85 troubleshooting See: 85.?
NO -
Go to step 6.
6. Test-drive the vehicle.
7. Check the VEHICLE SPEED in the TPMS DATA LIST with the HDS.
Is the vehicle speed indicated?
YES -
Check for loose terminals and poor connections at the TPMS control unit. If necessary, substitute a known-good TPMS control unit See:
Instrument Panel, Gauges and Warning Indicators/Tire Monitoring System/Tire Pressure Module/Service and Repair, and recheck.?
NO -
Go to step 8.
8. Check the speedometer.
Does the speedometer register speed?
YES -
Replace the TPMS control unit See: Instrument Panel, Gauges and Warning Indicators/Tire Monitoring System/Tire Pressure Module/Service and
Repair.?
NO -
Update the PCM if it does not have the latest software See: Powertrain Management/Computers and Control Systems/Engine Control
Module/Testing and Inspection/Programming and Relearning/PCM Update, or substitute a known-good PCM, then go to step 1 and recheck. If the
PCM was updated and DTCs are not indicated, troubleshooting is complete. If the PCM was substituted and DTCs are not indicated, replace the
