Is the resistance as specified?
YES -
Go to step 16.
NO -
Open in the wire harness between SRS unit connector B (39P) terminal No. 1 and ODS unit harness 18P connector terminal No. 7 (floor wire
harness, or ODS unit harness); replace the faulty harness, then clear the DTC.?
16. Reconnect the negative cable to the battery.
17. Turn the ignition switch to ON (II).
18. Measure the voltage between body ground and SRS unit connector B (39P) terminal No. 1. There should be less than 0.2 V.
Is the voltage as specified?
YES -
Go to step 19.
NO -
Short to power between SRS unit connector B (39P) terminal No. 1 and ODS unit harness 18P connector terminal No. 7 (floor wire harness, or
ODS unit harness); replace the faulty harness, then clear the DTC.?
19. Replace the ODS unit See: Relays and Modules/Relays and Modules - Restraints and Safety Systems/Air Bag Control Module/Service and
Repair/ODS Unit Replacement.
20. Clear the DTCs with the HDS.
21. Check for DTCs with the HDS.
Is the DTC 85-61 or 85-62 indicated?
