7. Turn the ignition switch to ON (II), then wait for 10 seconds.
8. Clear the DTCs with the HDS.
9. Turn the ignition switch to ON (II), then wait for 10 seconds.
10. From the HDS Main Menu, select SRS, then Inspection. In the Inspection Menu, select SWS DTC CHECK.
Is SWS DTC 11-11 indicated?
YES -
Short to power in the ODS unit harness; replace the ODS unit harness, then clear the DTC. If the DTC does not clear, replace the ODS unit See:
Relays and Modules/Relays and Modules - Restraints and Safety Systems/Air Bag Control Module/Service and Repair/ODS Unit Replacement.?
NO -
Faulty inner side front passenger's weight sensor; replace the inner side front passenger's weight sensor See: Restraints and Safety Systems/Air Bag
Systems/Seat Occupant Sensor/Service and Repair, then clear the DTC.?
11. Turn the ignition switch to LOCK (0).
12. Disconnect the ODS unit harness 2P connector (A) from the inner side front passenger's weight sensor (B).
13. Turn the ignition switch to ON (II), then wait for 10 seconds.
14. Clear the DTCs with the HDS.
15. Turn the ignition switch to LOCK (0), then wait for 10 seconds.
16. Turn the ignition switch to ON (II), then wait for 10 seconds.
17. From the HDS Main Menu, select SRS, then Inspection. In the Inspection Menu, select SWS DTC CHECK.
Is SWS DTC 11-12 indicated?
