12. Turn the ignition switch to ON (II).
13. Measure the voltage between body ground and SRS unit connector A (39P) terminals No. 38 and No. 39 individually. There should be less
than 0.2 V.
Is the voltage as specified?
YES -
Go to step 14.
NO -
Short to power in the right engine compartment wire harness or the dashboard wire harness; replace the faulty harness, then clear the DTC.?
14. Turn the ignition switch to LOCK (0).
15. Connect the SRS inflator simulator (jumper connector) and the black SRS simulator lead (A) of simulator lead L to the right engine
compartment wire harness 2P connector (B).
16. Measure the resistance between SRS unit connector A (39P) terminals No. 38 and No. 39. There should be less than 1.0 Ohms.
Is the resistance as specified?
