1405
Navigation System DTC Troubleshooting: 1405
DTC 1405:
Audio Error 5 (HDD Error)
NOTE:
- Check the vehicle battery condition first See: Starting and Charging/Battery/Testing and Inspection/Component Tests and General
Diagnostics/Battery Test.
- This navigation DTC sets when the internal temperature of the HDD rises above 158 掳F (70 掳C). The unit is designed to shut down to protect
the HDD. This could be caused by an inoperative audio-navigation unit cooling fan or if the vehicle cabin temperature exceeds the maximum.
Do the troubleshooting when the audio-navigation unit is within the allowable temperature range.
- Before you troubleshoot, make sure to follow the general troubleshooting information See: Accessories and Optional Equipment/Navigation
System/Testing and Inspection/Initial Inspection and Diagnostic Overview/How to Troubleshoot the Navigation System.
1. Check that the temperature is between -4 掳F (-20 掳C), below 158 掳F (70 掳C) in the passenger's cabin.
2. Clear the hard error code.
3. Turn the ignition switch to LOCK (0), and then back to ON (II).
4. Check for the hard error code.
Is DTC 1405 indicated?
YES -
Replace the audio-navigation unit See: Accessories and Optional Equipment/Radio, Stereo, and Compact Disc/Service and
Repair/Audio-Navigation Unit Removal/Installation.?
NO -
Intermittent failure, the system is OK at this time. If the vehicle repeatedly comes back with the DTC, replace the audio-navigation unit See:
Accessories and Optional Equipment/Radio, Stereo, and Compact Disc/Service and Repair/Audio-Navigation Unit Removal/Installation.?
1410
Navigation System DTC Troubleshooting: 1410
DTC 1410:
Audio Error 10 (RES Error)
NOTE:
- Check the vehicle battery condition first See: Starting and Charging/Battery/Testing and Inspection/Component Tests and General
Diagnostics/Battery Test.
- This navigation DTC sets when a mechanical malfunction in the rear controller and screen is detected.
- Check any official Honda service website for more service information about the navigation system.
- Before you troubleshoot, make sure to follow the general troubleshooting information See: Accessories and Optional Equipment/Navigation
System/Testing and Inspection/Initial Inspection and Diagnostic Overview/How to Troubleshoot the Navigation System.
1. Check that the temperature is between -4 掳F (-20 掳C), below 158 掳F (70 掳C) around the rear controller and screen.
2. Clear the hard error code.
3. Turn the ignition switch to LOCK (0), and then back to ON (II).
4. Check for the hard error code.
Is DTC 1410 indicated?
