DTC 61, 63, 65, 67:
Initiator Circuit Open
1. Turn the ignition switch to ON (II).
2. Clear the DTC with the HDS.
3. Turn the ignition switch to LOCK (0), then turn it to ON (II) again.
4. Check for DTCs with the HDS, and note the indicated DTC(s).
Is DTC 61, 63, 65, or 67 indicated?
YES -
Go to step 5.
NO -
The system is OK at this time.?
5. Turn the ignition switch to LOCK (0).
6. Disconnect the appropriate initiator 3P connector.
7. Disconnect the TPMS control unit 20P connector See: Instrument Panel, Gauges and Warning Indicators/Tire Monitoring System/Tire
Pressure Module/Service and Repair.
8. Check for continuity between TPMS control unit 20P connector terminal No. 20 and appropriate initiator 3P connector terminal No. 1.
