Is the resistance between 0.4-1.5 Ohms?
YES -
Repair an open in the wire between the damper coil and active damper control unit, then go to step 11.
NO -
Replace the damper unit: Front See: Steering and Suspension/Suspension/Suspension Spring ( Coil / Leaf )/Service and Repair/Removal and
Replacement/Front Damper/Spring Removal/Installation, rear See: Steering and Suspension/Suspension/Suspension Strut / Shock
Absorber/Service and Repair/Removal and Replacement/Rear Damper Replacement, then go to step 11.
11. Reconnect all connectors.
12. Turn the ignition switch to ON (II).
13. Clear the DTC with the HDS.
14. Turn the ignition switch to LOCK (0).
15. Start the engine.
16. Do the DAMPER FORCE OPERATION TEST in the FUNCTIONAL TESTS MENU with the HDS.
17. Check for DTCs with the HDS.
Is any DTC indicated?
YES -
Go to the indicated DTC's troubleshooting.
NO -
Troubleshooting is complete.?
8-2
Active Damper System DTC Troubleshooting: 8-2
DTC 8-2:
Sensor Reference Voltage Malfunction (SVCC Line)
1. Turn the ignition switch to ON (II).
2. Clear the DTC with the HDS.
3. Turn the ignition switch to LOCK (0).
4. Start the engine, and wait 5 seconds.
5. Check for DTCs with the HDS.
