Saturday, May 30, 2020

2010 Acura Truck MDX V6-3.7L Page 224


7. Connect the SRS inflator simulator (2 Ohms connectors) and simulator lead J to the cable reel.



8. Reconnect the negative cable to the battery.



9. Clear the DTCs with the HDS.



10. Check for DTCs with the HDS.



Is DTC 11-1x, 11-2x, 11-4x, or 11-5x indicated?



YES -



Go to step 11.



NO -



Open or increased resistance in the driver's airbag first or second inflator; replace the driver's airbag See: Restraints and Safety Systems/Air Bag



Systems/Air Bag/Service and Repair/Removal and Replacement/Driver's Airbag Replacement, then clear the DTC.?



11. Turn the ignition switch to LOCK (0).



12. Disconnect the negative cable from the battery, then wait at least 3 minutes.



13. Remove the column cover See: Steering and Suspension/Steering/Steering Column/Steering Column Cover/Service and Repair, then



disconnect the dashboard wire harness 4P connector (A) from the cable reel.



14. Connect the SRS inflator simulator (2 Ohms connectors) and simulator lead J to the dashboard wire harness.



15. Reconnect the negative cable to the battery.



16. Clear the DTCs with the HDS.



17. Check for DTCs with the HDS.



Is DTC 11-1x, 11-2x, 11-4x, or 11-5x indicated?