6. Disconnect the front passenger's seat wire harness 3P connector (A) from the front passenger's seat belt buckle switch 3P connector (B).
7. Buckle the front passenger's seat belt. Measure the resistance between front passenger's seat belt buckle switch 3P connector terminals No. 1
and No. 3. There should be less than 1.0 Ohms.
Is the resistances specified?
YES -
Go to step 8.
NO -
Faulty front passenger's seat belt buckle switch; replace the front passenger's seat belt buckle assembly, then clear the DTC.?
8. Disconnect the negative cable from the battery, then wait for 3 minutes.
9. Disconnect SRS unit connector B (39P) from the SRS unit.
10. Measure the resistance between SRS unit connector B (39P) terminal No. 22 and front passenger's seat wire harness 3P connector terminal
No. 1. There should be less than 1.0 Ohms.
Is the resistance as specified?
