Sunday, May 3, 2020

2010 Acura Truck MDX V6-3.7L Page 716


and Drivetrain/Relays and Modules - Differential/Control Unit/Testing and Inspection/SH-AWD Control Unit Update.



3. Check for DTCs with the HDS.



Is DTC 91-1 indicated?



YES -



Update the SH-AWD control unit if it does not have the latest software See: Powertrain Management/Transmission Control Systems/Relays and



Modules - Transmission and Drivetrain/Relays and Modules - Differential/Control Unit/Testing and Inspection/SH-AWD Control Unit Update, or



substitute a known-good SH-AWD control unit See: Powertrain Management/Transmission Control Systems/Relays and Modules - Transmission



and Drivetrain/Relays and Modules - Differential/Control Unit/Service and Repair, and recheck. If the symptom/indication goes away with the



updated SH-AWD control unit, troubleshooting is complete. If the symptom/indication goes away with a known-good SH-AWD control unit,



replace the original SH-AWD control unit See: Powertrain Management/Transmission Control Systems/Relays and Modules - Transmission and



Drivetrain/Relays and Modules - Differential/Control Unit/Service and Repair.?



NO -



Update is complete.?



92



Adaptive Cruise Control (ACC) DTC Troubleshooting: 92



DTC 92:



VSA Modulator-Control Unit Malfunction



1. Check for VSA System DTCs with the HDS.



Are any DTCs indicated?



YES -



Troubleshoot the indicated VSA system DTC(s).?



NO -



Go to step 2.



2. Clear the DTCs with the HDS.



3. Test-drive the vehicle with the adaptive cruise control (ACC) activated.



4. Check for DTCs with the HDS.



Is DTC 92 indicated?



YES -



Check for loose or poor connections. If OK, update the ACC unit See: Cruise Control/Testing and Inspection/Programming and Relearning, then



recheck. If the ACC unit was already updated, replace the ACC unit See: Cruise Control/Cruise Control Module/Service and Repair.?



NO -



Intermittent failure, the system is OK at this time. Check for loose or poor connections.?



92-1x



SRS DTC Troubleshooting: 92-1x



DTC 92-1x ("x" can be 0 thru 9 or A thru F):



Short to Power in the Passenger's Airbag Cutoff Indicator



NOTE:



- Before doing this troubleshooting procedure, review SRS Precautions and Procedures See: Body and Frame/Air Bag(s) Arming and



Disarming/Service and Repair, General Troubleshooting Information See: Restraints and Safety Systems/Air Bag Systems/Testing and



Inspection/Reading and Clearing Diagnostic Trouble Codes, and Battery Terminal Disconnection and Reconnection See: Starting and



Charging/Battery/Service and Repair/Procedures.



- Before replacing the SRS unit, check the SRS unit software version with the HDS. If the software version is not the latest, update the SRS