YES -
Do the DTC 2607 troubleshooting See: 2607.?
NO -
Go to step 2.
2. Clear the hard error code.
3. Turn the ignition switch to LOCK (0), and then back to ON (II).
4. Press the XM button to select XM mode.
5. Check for the hard error code.
Is DTC 1702 indicated?
YES -
Go to step 6.
NO -
Intermittent failure, the system is OK at this time.?
6. Turn the ignition switch to LOCK (0).
7. Check for poor connections or loose terminals at XM receiver connector B (2P).
Is the connection OK?
YES -
Replace the XM antenna See: Accessories and Optional Equipment/Antenna/Antenna, Radio/Service and Repair.?
NO -
Repair poor connections or loose terminals, and recheck.?
1801
Navigation System DTC Troubleshooting: 1801
DTC 1801:
HIP Error
With AcuraLink
NOTE:
- Check the vehicle battery condition first See: Starting and Charging/Battery/Testing and Inspection/Component Tests and General
Diagnostics/Battery Test.
- This navigation DTC sets when a problem (open or short) is detected in the COMM BUS.
- Before you troubleshoot, make sure to follow the general troubleshooting information See: Accessories and Optional Equipment/Navigation
System/Testing and Inspection/Initial Inspection and Diagnostic Overview/How to Troubleshoot the Navigation System.
- Check for and resolve any B-CAN DTCs before troubleshooting.
- Check any official Honda service website for any service information about the AcuraLink.
1. Clear the hard error code.
2. Turn the ignition switch to LOCK (0), and then back to ON (II).
3. Go into the Diagnostic Menu, and select the Self-Diagnosis Mode in the Select Diagnosis Items menu See: Accessories and Optional
Equipment/Navigation System/Testing and Inspection/Initial Inspection and Diagnostic Overview/Navigation System Diagnostic Mode.
4. Check the System Links.
Is the XM (HIP) icon red?
