14. Turn the ignition switch to ON (II).
Does the front blower motor run at high speed?
YES -
Go to step 15.
NO -
Repair an open in the GRN wire between the front power transistor and the front blower motor.?
15. Turn the ignition switch to LOCK (0).
16. Disconnect the jumper wire.
17. Disconnect climate control unit connector A (40P).
18. Check for continuity between body ground and climate control unit connector A (40P) terminals No. 9 and No. 10 individually.
Is there continuity?
YES -
Repair a short to body ground in the wire(s) between the climate control unit and the front power transistor.?
NO -
Go to step 19.
19. Check for continuity between the following terminals of climate control unit connector A (40P) and the front power transistor 4P connector.
