Is there continuity?
YES -
Replace the power tailgate closer unit.?
NO -
Go to step 11.
11. Disconnect power tailgate control unit connector C (14P).
12. Check for continuity between power tailgate control unit connector C (14P) terminal No. 3 and body ground.
Is there continuity?
YES -
Repair a short to ground in the wire.?
NO -
Go to step 13.
13. Turn the tailgate lock latch to the fully-closed position using a screwdriver.
14. Disconnect power tailgate control unit connector B (20P).
15. Connect battery power to the power tailgate control unit connector B (20P) terminal No. 1 and ground the terminal No. 2 momentarily. (The
motor should run in the release direction.)
16. Reconnect the 6P connector to the power tailgate closer unit.
17. Check for continuity between power tailgate control unit connector C (14P) terminals No. 3 and No. 11.
