Go to step 5.
NO -
Intermittent failure, the system is OK at this time. Check for loose or poor connections.?
5. Select POWER SEAT/POWER MIRROR from the BODY ELECTRICAL menu, and enter the DATA LIST.
6. Check the NORMAL/ABNORMAL information of the LEFT POWER MIRROR VERTICAL SENSOR in the DATA LIST.
Is the information indicator ABNORMAL?
YES -
Go to step 7.
NO -
Replace the driver's MPCS unit.?
7. Turn the ignition switch to LOCK (0).
8. Disconnect driver's MPCS unit connector A (40P).
9. Disconnect the driver's door wire harness A 16P connector.
10. Check for continuity between driver's MPCS unit connector A (40P) terminal No. 9 and driver's door wire harness A 16P connector terminal
No. 3.
Is there continuity?
YES -
Go to step 11.
NO -
Repair an open in the wire.?
11. Check for continuity between driver's door wire harness A 16P connector terminal No. 3 and body ground.
