3. Go into the Diagnostic Menu, and select the Self-Diagnosis Mode in the Select Diagnosis Items menu See: Accessories and Optional
Equipment/Navigation System/Testing and Inspection/Initial Inspection and Diagnostic Overview/Navigation System Diagnostic Mode.
4. Select the XM (HIP), then check the XM (HIP) System Link.
Are the XM (HIP). ECU and Navi icons red?
YES -
Do the DTC 2704 troubleshooting See: 2704.?
NO -
Go to step 5.
5. Check the XM (HIP) System Link.
Is the HFL icon red?
YES -
Go to step 6.
NO -
Intermittent failure, the system is OK at this time.?
6. Turn the ignition switch to LOCK (0).
7. Connect the HDS to the DLC See: Accessories and Optional Equipment/Cellular Phone/Testing and Inspection/Initial Inspection and
Diagnostic Overview.
8. Turn the ignition switch to ON (II).
9. Check for DTCs with the HDS.
Are any HFL DTCs indicated?
YES -
Do the HFL DTC troubleshooting.?
NO -
Go to step 10.
10. Do the B-CAN test mode A See: Powertrain Management/Computers and Control Systems/Information Bus/Testing and
Inspection/Component Tests and General Diagnostics/Troubleshooting - B-CAN System Diagnosis Test Mode A, and check the
communication with the HandsFreeLink control unit.
Does the HandsFreeLink control unit communicate with the HDS?
YES -
Go to step 11.
NO -
Go to HandsFreeLink control unit troubleshooting.?
11. Turn the ignition switch to LOCK (0).
12. Disconnect the HandsFreeLink control unit 28P connector, and AcuraLink control unit (XM receiver) connector A (32P).
13. Check for continuity between body ground and HandsFreeLink control unit 28P connector terminals No. 6, and No. 7, No. 20, and No. 21
