Showing posts with label 4. Start the engine.. Show all posts
Showing posts with label 4. Start the engine.. Show all posts

Monday, February 10, 2020

2010 Acura Truck MDX V6-3.7L Page 410


4. Start the engine.



5. Check for DTCs with the HDS.



Is DTC 41-2 indicated?



YES -



Go to step 6.



NO -



Intermittent failure, the system is OK at this time. Check for intermittent open between SH-AWD control unit connector terminals A10 and A20



and VSA modulator-control unit 46P connector terminals No. 38 and No. 39.?



6. Turn the ignition switch to LOCK (0).



7. Disconnect the VSA modulator-control unit 46P connector.



8. Disconnect SH-AWD control unit connector A (20P).



9. Check for continuity between VSA modulator-control unit 46P connector terminals No. 38, No. 39 and SH-AWD control unit connector



terminals A10, A20 respectively.



Is there continuity?



YES -



Update the SH-AWD control unit if it does not have the latest software See: Powertrain Management/Transmission Control Systems/Relays and



Modules - Transmission and Drivetrain/Relays and Modules - Differential/Control Unit/Testing and Inspection/SH-AWD Control Unit Update, or



substitute a known-good SH-AWD control unit See: Powertrain Management/Transmission Control Systems/Relays and Modules - Transmission



and Drivetrain/Relays and Modules - Differential/Control Unit/Service and Repair, and recheck. If the symptom/indication goes away with the



updated SH-AWD control unit, troubleshooting is complete. If the symptom/indication goes away with a known-good SH-AWD control unit,



replace the original SH-AWD control unit See: Powertrain Management/Transmission Control Systems/Relays and Modules - Transmission and



Drivetrain/Relays and Modules - Differential/Control Unit/Service and Repair.?



NO -



Repair an open in the wires between the SH-AWD control unit and the VSA modulator-control unit.?



41-2x



SRS DTC Troubleshooting: 41-2x, 41-8x, 41-9x, 41-Ax, 41-Bx



DTC 41-2x, 41-8x, 41-9x, 41-Ax, 41-Bx ("x" can be 0 thru 9 or A thru F):



Internal Failure of the Left Front Impact Sensor



NOTE: Before doing this troubleshooting procedure, review SRS Precautions and Procedures See: Body and Frame/Air Bag(s) Arming and



Disarming/Service and Repair and General Troubleshooting Information See: Restraints and Safety Systems/Air Bag Systems/Testing and



Inspection/Reading and Clearing Diagnostic Trouble Codes.