Showing posts with label and try again. If UNDEFINED is still displayed. Show all posts
Showing posts with label and try again. If UNDEFINED is still displayed. Show all posts

Monday, April 27, 2020

2010 Acura Truck MDX V6-3.7L Page 301


switch to ON (II), and try again. If UNDEFINED is still displayed, repeat this procedure until NORMAL is shown.



Is 176 掳F (80 掳C) or more indicated?



YES -



Replace the appropriate tire pressure sensor See: Instrument Panel, Gauges and Warning Indicators/Tire Monitoring System/Tire Pressure



Sensor/Service and Repair.?



NO -



Check for loose terminals and poor connections at the TPMS control unit. If necessary, substitute a known-good TPMS control unit See:



Instrument Panel, Gauges and Warning Indicators/Tire Monitoring System/Tire Pressure Module/Service and Repair, and recheck.?



VSA System



VSA DTC Troubleshooting: 21, 22, 23, 24



DTC 21, 22, 23, 24:



Magnetic Encoder Malfunction



NOTE: Before you troubleshoot, record all freeze data and any on-board snapshot, and review the general troubleshooting information.



1. Turn the ignition switch to ON (II).



2. Clear the DTC with the HDS.



3. Test-drive the vehicle at 31 mph (50 km/h) or more.



4. Check for DTCs with the HDS.



Is DTC 21, 22, 23, or 24 indicated?



YES -



Go to step 5.



NO -



Intermittent failure, the system is OK at this time. Check for loose terminals between the appropriate wheel speed sensor 2P connector and the



VSA modulator-control unit 46P connector. Refer to intermittent failures troubleshooting.?



5. Inspect the appropriate magnetic encoder for debris or cracks.



Is the magnetic encoder surface OK?



YES -



Go to step 6.



NO -



Remove the debris from the magnetic encoder, or replace the front hub bearing unit or the rear hub bearing unit (magnetic encoder):



- FRreoanr:t :R Reepplalaccee t hthee r feraorn ht uhbu bb ebaerainrign gu nuint.i?t.?



6. Update the VSA modulator-control unit if it does not have the latest software See: Brakes and Traction Control/Antilock Brakes / Traction



Control Systems/Traction Control Module/Testing and Inspection. If the unit already has the latest software, substitute a known-good VSA



modulator-control unit See: Brakes and Traction Control/Antilock Brakes / Traction Control Systems/Traction Control Module/Service and



Repair.



7. Test-drive the vehicle at 31 mph (50 km/h) or more.