Is the resistance as specified?
YES -
Go to step 19.
NO -
Repair a short to ground in the wire between the ACC unit and the left front brake fluid pressure sensor.?
19. Disconnect the left front brake fluid pressure sensor 3P connector.
20. Connect left front brake fluid pressure sensor 3P connector terminal No. 3 to body ground with a jumper wire.
21. Measure the resistance between ACC unit 20P connector terminal No. 14 and body ground. There should be less than 1.0 Ohms.
Is the resistance as specified?
YES -
Go to step 22.
NO -
Repair an open in the wire between the ACC unit and the left front brake fluid pressure sensor.?
22. Measure the resistance between ACC unit 20P connector terminal No. 5 and No. 14. There should be an open circuit or at least 1 MOhms.
Is the resistance as specified?
YES -
Go to step 23.
NO -
Repair a short in the wires between the PRESS FL line and the VCC line.?
