Is there continuity?
YES -
Go to step 9.
NO -
Repair an open in the wire between the ACC unit and the branch of the F-CAN A line (F-CAN A H).?
9. Check for continuity between ACC unit 20P connector terminal No. 20 and gauge control module connector A (12P) terminal No. 6.
Is there continuity?
YES -
Faulty gauge control module; replace the gauge control module See: Instrument Panel, Gauges and Warning Indicators/Instrument Cluster /
Carrier/Service and Repair.?
NO -
Repair an open in the wire between the ACC unit and the branch of the F-CAN A line (F-CAN A L).?
VSA System
VSA DTC Troubleshooting: 113
DTC 113:
Yaw Rate-Acceleration Sensor Power Source Malfunction
NOTE: Before you troubleshoot, record all freeze data and any on-board snapshot, and review the general troubleshooting information.
1. Turn the ignition switch to LOCK (0).
2. Disconnect the yaw rate-lateral/longitudinal acceleration sensor 4P connector See: Brakes and Traction Control/Antilock Brakes / Traction
