Go to step 6.
NO -
Intermittent failure, the system is OK at this time. Check for poor or loose connections between the vertical acceleration sensor, the suspension
stroke sensor, and the active damper control unit.?
6. Clear the DTC with the HDS.
7. Turn the ignition switch to LOCK (0).
8. Disconnect the right-front suspension stroke sensor 3P connector.
9. Start the engine, and wait 5 seconds.
10. Check for DTCs with the HDS.
Is DTC 8-2 indicated?
YES -
Go to step 11.
NO -
Replace the right-front suspension stroke sensor See: Sensors and Switches/Sensors and Switches - Steering and Suspension/Sensors and Switches
- Suspension/Ride Height Sensor/Service and Repair.?
11. Clear the DTC with the HDS.
12. Turn the ignition switch to LOCK (0).
13. Disconnect the right-rear suspension stroke sensor 3P connector.
14. Start the engine, and wait 5 seconds.
15. Check for DTCs with the HDS.
Is DTC 8-2 indicated?
YES -
Go to step 16.
NO -
Replace the right-rear suspension stroke sensor See: Sensors and Switches/Sensors and Switches - Steering and Suspension/Sensors and Switches -
Suspension/Ride Height Sensor/Service and Repair.?
16. Clear the DTC with the HDS.
17. Turn the ignition switch to LOCK (0).
18. Disconnect the front vertical acceleration sensor 3P connector.
19. Start the engine, and wait 5 seconds.
20. Check for DTCs with the HDS.
Is DTC 8-2 indicated?
YES -
Go to step 21.
NO -
Replace the front vertical acceleration sensor See: Sensors and Switches/Sensors and Switches - Steering and Suspension/Sensors and Switches -
Suspension/Acceleration Sensor/Service and Repair.?
21. Clear the DTC with the HDS.
22. Turn the ignition switch to LOCK (0).
