Go to step 7.
NO -
Repair poor connection or loose terminal.?
7. Disconnect the rearview camera 6P connector.
8. Turn the ignition switch to ON (II).
9. Measure the voltage between rearview camera 6P connector terminal No. 3 and body ground.
Is there 3-9 V?
YES -
Replace the rearview camera See: Accessories and Optional Equipment/Camera/Rear Vision Camera/Service and Repair.?
NO -
Go to step 10.
10. Measure the voltage between navigation display unit 28P connector terminal No. 9 and body ground.
Is there 3-9 V?
YES -
There is an open in the wire between the navigation display unit and the rearview camera. Replace the affected shielded harness.?
NO -
Replace the navigation display unit See: Accessories and Optional Equipment/Navigation System/Navigation Display/Service and Repair.?
2610
Navigation System DTC Troubleshooting: 2610
DTC 2610:
DRAM Diag
NOTE:
- Check the vehicle battery condition first See: Starting and Charging/Battery/Testing and Inspection/Component Tests and General
Diagnostics/Battery Test.
- This navigation DTC sets when a problem with the audio-navigation unit internal DRAM is detected.
