1. Turn the ignition switch to ON (II).
2. Clear the DTC with the HDS.
3. Turn the ignition switch to LOCK (0).
4. Start the engine, and wait 5 seconds.
5. Check for DTCs with the HDS.
Is DTC 5-1, 5-2, 5-3, 5-4, 7-1, 7-2, 7-3, 7-4, 7-5, E-1, E-2, E-5, E-6, E-7, E-8, E-A, or E-C indicated?
YES -
Replace the active damper control unit See: Relays and Modules/Relays and Modules - Steering and Suspension/Relays and Modules -
Suspension/Suspension Control Module/Service and Repair.?
NO -
Intermittent failure, the system is OK at this time. Check for poor or loose connections at the active damper control unit.?
5-3
Active Damper System DTC Troubleshooting: 5-1, 5-2, 5-3, 5-4, 7-1, 7-2, 7-3, 7-4, 7-5, E-1, E-2, E-5, E-6, E-7, E-8, E-A, E-C
DTC 5-1:
Active Damper Control Unit Internal Right-front Damper Coil Drive Circuit Stuck ON
DTC 5-2:
Active Damper Control Unit Internal Left-front Damper Coil Drive Circuit Stuck ON
DTC 5-3:
Active Damper Control Unit Internal Right-rear Damper Coil Drive Circuit Stuck ON
DTC 5-4:
Active Damper Control Unit Internal Left-rear Damper Coil Drive Circuit Stuck ON
DTC 7-1:
Active Damper Control Unit Internal Circuit Malfunction
DTC 7-2:
Active Damper Control Unit Internal Circuit Malfunction
DTC 7-3:
Active Damper Control Unit Internal Circuit Malfunction
DTC 7-4:
Active Damper Control Unit Internal Circuit Malfunction
DTC 7-5:
Active Damper Control Unit Internal Circuit Malfunction
DTC E-1:
Active Damper Control Unit Internal Circuit Malfunction
DTC E-2:
Active Damper Control Unit Internal Circuit Malfunction
