Is there continuity?
YES -
Repair a short to body ground in the wire between the appropriate damper coil and active damper control unit, then go to step 16.
NO -
Go to step 14.
14. Check for continuity between the appropriate active damper control unit connector A (20P) terminal and appropriate damper coil 2P
connector terminal No. 1 (see table).
Is there continuity?
YES -
Go to step 15.
NO -
Repair an open in the wire between the appropriate damper coil and the active damper control unit, then go to step 16.
15. Check for continuity between appropriate damper coil 2P connector terminals No. 1 and No. 2 (see table).
