23. Disconnect the right-rear vertical acceleration sensor 3P connector.
24. Start the engine, and wait 5 seconds.
25. Check for DTCs with the HDS.
Is DTC 8-2 indicated?
YES -
Go to step 26.
NO -
Replace the right-rear vertical acceleration sensor See: Sensors and Switches/Sensors and Switches - Steering and Suspension/Sensors and
Switches - Suspension/Acceleration Sensor/Service and Repair.?
26. Clear the DTC with the HDS.
27. Turn the ignition switch to LOCK (0).
28. Disconnect the left-rear vertical acceleration sensor 3P connector.
29. Start the engine, and wait 5 seconds.
30. Check for DTCs with the HDS.
Is DTC 8-2 indicated?
YES -
Go to step 31.
NO -
Replace the left-rear vertical acceleration sensor See: Sensors and Switches/Sensors and Switches - Steering and Suspension/Sensors and Switches
- Suspension/Acceleration Sensor/Service and Repair.?
31. Turn the ignition switch to LOCK (0).
32. Disconnect active damper control unit connector B (14P) See: Relays and Modules/Relays and Modules - Steering and Suspension/Relays
and Modules - Suspension/Suspension Control Module/Service and Repair.
33. Check for continuity between body ground and active damper control unit connector B (14P) terminal No. 4.
Is there continuity?
YES -
Repair a short to body ground in the wire between the right-front/right-rear suspension stroke sensors, the front/right-rear/left-rear vertical
acceleration sensors, and the active damper control unit.?
NO -
Go to step 34.
34. Check for continuity between active damper control unit connector B (14P) terminals No. 4 and No. 11.
