No Signal From the Right Side Impact Sensor (second)
NOTE:
- Before doing this troubleshooting procedure, review SRS Precautions and Procedures See: Body and Frame/Air Bag(s) Arming and
Disarming/Service and Repair, General Troubleshooting Information See: Restraints and Safety Systems/Air Bag Systems/Testing and
Inspection/Reading and Clearing Diagnostic Trouble Codes, and Battery Terminal Disconnection and Reconnection See: Starting and
Charging/Battery/Service and Repair/Procedures.
- Before replacing the SRS unit, check the SRS unit software version with the HDS. If the software version is not the latest, update the SRS
unit software See: Restraints and Safety Systems/Air Bag Systems/Testing and Inspection/Programming and Relearning/SRS Unit Update,
and retest.
1. Clear the DTCs with the HDS.
2. Turn the ignition switch to ON (II), then wait for 10 seconds.
3. Check for DTCs with the HDS.
Is DTC 46-1x (except 46-11) indicated?
YES -
Faulty right side impact sensor (second); replace the right side impact sensor (second) See: Restraints and Safety Systems/Air Bag Systems/Impact
Sensor/Service and Repair/Side Impact Sensor (Second) Replacement, then clear the DTC.?
NO -
Go to step 4.
4. Clear the DTCs with the HDS.
5. Turn the ignition switch to ON (II), then wait for 10 seconds.
6. Check for DTCs with the HDS.
Is DTC 44-1x (except 44-11) indicated?
YES -
Faulty right side impact sensor (first); replace the right side impact sensor (first) See: Restraints and Safety Systems/Air Bag Systems/Impact
Sensor/Service and Repair/Side Impact Sensor (First) Replacement, then clear the DTC.?
NO -
Go to step 7.
7. Clear the DTCs with the HDS.
8. Turn the ignition switch to ON (II), then wait for 10 seconds.
9. Check for DTCs with the HDS.
Is DTC 46-11 indicated?
YES -
Go to step 13.
NO -
Go to step 10.
10. Clear the DTCs with the HDS.
11. Turn the ignition switch to ON (II), then wait for 10 seconds.
12. Check for DTCs with the HDS.
Is DTC 44-11 indicated?
