Is the resistance between 0.4-1.5 Ohms?
YES -
Repair an open or high resistance in the wires between the damper coil and the active damper control unit, then go to step 12.
NO -
Replace the appropriate damper unit: Front See: Steering and Suspension/Suspension/Suspension Spring ( Coil / Leaf )/Service and
Repair/Removal and Replacement/Front Damper/Spring Removal/Installation, rear See: Steering and Suspension/Suspension/Suspension Strut /
Shock Absorber/Service and Repair/Removal and Replacement/Rear Damper Replacement then go to step 12.
12. Reconnect all connectors.
13. Turn the ignition switch to ON (II).
14. Clear the DTC with the HDS.
15. Turn the ignition switch to LOCK (0).
16. Start the engine.
17. Do the DAMPER FORCE OPERATION TEST in the FUNCTIONAL TESTS MENU with the HDS.
18. Check for DTCs with the HDS.
Is any DTC indicated?
YES -
Go to the indicated DTC's troubleshooting.
NO -
Troubleshooting is complete.?
6-2
Active Damper System DTC Troubleshooting: 6-1, 6-2, 6-3, 6-4
DTC 6-1:
Active Damper Control Unit Internal Right-front Damper Coil Drive Circuit Current Lower Than Expected
DTC 6-2:
Active Damper Control Unit Internal Left-front Damper Coil Drive Circuit Current Lower Than Expected
DTC 6-3:
Active Damper Control Unit Internal Right-rear Damper Coil Drive Circuit Current Lower Than Expected
DTC 6-4:
Active Damper Control Unit Internal Left-rear Damper Coil Drive Circuit Current Lower Than Expected
1. Turn the ignition switch to LOCK (0).
