7. Connect the SRS inflator simulator (2 Ohms connectors) and simulator lead J to the cable reel.
8. Reconnect the negative cable to the battery.
9. Clear the DTCs with the HDS.
10. Check for DTCs with the HDS.
Is DTC 11-8x or 11-Ax indicated?
YES -
Go to step 11.
NO -
Short to power in the driver's airbag first or second inflator; replace the driver's airbag See: Restraints and Safety Systems/Air Bag Systems/Air
Bag/Service and Repair/Removal and Replacement/Driver's Airbag Replacement, then clear the DTC.?
11. Turn the ignition switch to LOCK (0).
12. Disconnect the negative cable from the battery, then wait at least 3 minutes.
13. Remove the column cover See: Steering and Suspension/Steering/Steering Column/Steering Column Cover/Service and Repair, then
disconnect the dashboard wire harness 4P connector (A) from the cable reel.
14. Connect the SRS inflator simulator (2 Ohms connectors) and simulator lead J to the dashboard wire harness.
15. Reconnect the negative cable to the battery.
16. Clear the DTCs with the HDS.
17. Check for DTCs with the HDS.
Is DTC 11-8x or 11-Ax indicated?
YES -
Go to step 18.
NO -
Short to power in the cable reel; replace the cable reel See: Restraints and Safety Systems/Air Bag Systems/Clockspring Assembly / Spiral
Cable/Service and Repair, then clear the DTC.?
18. Turn the ignition switch to LOCK (0).
19. Disconnect the negative cable from the battery, then wait at least 3 minutes.
20. Disconnect SRS unit connector A (39P) from the SRS unit.
21. Disconnect the SRS inflator simulator from the SRS simulator lead. Do not disconnect the simulator lead from the dashboard wire harness 4P