Friday, May 15, 2020

2010 Acura Truck MDX V6-3.7L Page 529


Is there continuity?



YES -



Go to step 5.



NO -



Repair an open in the wire between the VSA modulator-control unit and body ground (G303).?



5. Reconnect the VSA modulator-control unit 46P connector.



6. Turn the ignition switch to ON (II).



7. Clear the DTC with the HDS.



8. Test-drive the vehicle. Drive the vehicle at 10 mph (15 km/h) or more, with the engine speed at 2,500 rpm or more.



NOTE: Drive the vehicle on the road, not on a lift.



9. Check for DTCs with the HDS.



Is DTC 53 indicated?



YES -



Go to step 10.



NO -



Intermittent failure, the system is OK at this time. Check for loose terminals at the VSA modulator-control unit 46P connector. Check for a loose



connection at G303. Refer to intermittent failures troubleshooting.?



10. Update the VSA modulator-control unit if it does not have the latest software See: Brakes and Traction Control/Antilock Brakes / Traction



Control Systems/Traction Control Module/Testing and Inspection. If the unit already has the latest software, substitute a known-good VSA



modulator-control unit See: Brakes and Traction Control/Antilock Brakes / Traction Control Systems/Traction Control Module/Service and



Repair.



11. Test-drive the vehicle. Drive the vehicle at 10 mph (15 km/h) or more, with the engine speed at 2,500 rpm or more.



NOTE: Drive the vehicle on the road, not on a lift.



12. Check for DTCs with the HDS.



Is DTC 53 indicated?



YES -



Check for loose terminals in the VSA modulator-control unit 46P connector. Check for a loose connection at G303. If the VSA modulator-control



unit was updated, substitute a known-good VSA modulator-control unit See: Brakes and Traction Control/Antilock Brakes / Traction Control



Systems/Traction Control Module/Service and Repair, then retest. If the VSA modulator-control unit was substituted, go to step 1.



NO -



If the VSA modulator-control unit was updated, troubleshooting is complete. If the VSA modulator-control unit was substituted, replace the



original VSA modulator-control unit See: Brakes and Traction Control/Antilock Brakes / Traction Control Systems/Traction Control



Module/Service and Repair. If any other DTCs are indicated, go to the indicated DTCs troubleshooting.?